1. Rigid Stranding Machine Usage
The rigid stranding machine is used for twisting and compacting the
round or sector conductors, as well as pre-spiraling the split
conductors. For example, AAC, AAAC, ACSR, copper conductor from 15
sqmm to 1500 sqmm aluminum and copper conductor. It also used to
produce steel wire armoring layers.
The big bending machine is used to bend the steel plate to the
frame structure. Four frame structures share the circle equally,
and they are welded together with the big discs on the both sides.
Also all the structures are welded to the center thick wall tube.
The whole structure is strong and beautiful.
Then the whole structure will be machined on the big horizontal
lathe. This horizontal lathe is big enough to machine every part in
one step, without changing one end to the other. This process will
keep the concentricity of the whole structure, prolong the service
life of bearings on the both ends.
This double column vertical lathe is used to turn the big disc for
cradle type laying-up machine and the capstan of the stranding
machine. This machine can turn and burnish the grooves to protect
the cable and keep the same hual-off force.
2. Technical Parameters
Model (Rigid Stranding Machine)
| JLK-500 | JLK-630 | JLK-710/720 |
| Diameter of single wire | Copper | φ1.5-5 mm | φ1.5-5 mm | φ1.5-5 mm |
| Aluminum | φ1.5-5 mm | φ1.5-5 mm | φ1.5-5 mm |
Maximum stranded conductor OD
| φ35-55 mm | φ35-55 mm | φ35-55 mm |
| Stranding Pitch | 6 Bobbin Stranding Cage | 40-719 mm | 51-896 mm | 54-963 mm |
| 12 Bobbin Stranding Cage | 40-719 mm | 51-896 mm | 54-963 mm |
| 18 Bobbin Stranding Cage | 44-793 mm | 63-1056 mm | 57-1012 mm |
| 24 Bobbin Stranding Cage | 51-924 mm | 71-1246 mm | 66-1190 mm |
| 30 Bobbin Stranding Cage | 57-1028 mm | 87-1553 mm | 79-1403 mm |
| Rotating Speed | 6 Bobbin Stranding Cage | 230.6 r/min | 180.1 r/min | 150.6 r/min |
| 12 Bobbin Stranding Cage | 230.6 r/min | 180.1 r/min | 150.6 r/min |
| 18 Bobbin Stranding Cage | 208.5 r/min | 155 r/min | 142.6 r/min |
| 24 Bobbin Stranding Cage | 179 r/min | 130.1 r/min | 122.3 r/min |
| 30 Bobbin Stranding Cage | 161.8 r/min | 115.9 r/min | 102.7 r/min |
| Capstan | Capstan Wheel Diameter | 2000 mm | 2000 mm | 2000 mm |
| Maximum Haul-off Force | 30 T | 30 T | 40 T |
| Pre-spiral Device | Pitch | 500-2500mm | 500-2500mm | 500-2500mm |
Motor Power
| 90-180 KW | 110-180 KW | 130-180 KW |
Bobbin Size
| 500*375*127 | 630*475*127 | 710*530*127 |
Center Payoff Bobbin
| 1600*800*80 | 1600*800*80 | 1600*800*80 |
Take-up Bobbin
| 2500*1500*125 | 2500*1500*125 | 3150*1900*160 |
Maximum Haul-off Linear Speed
| 69 m/min | 69 m/min | 62 m/min |
Central Height
| 1000 mm | 1100 mm | 1100 mm |
3. Photos
4. Packing photos
5. Our factory and company introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in
2006. Our company is located in the Economic Development Zone of
Hejian City, Hebei Province, has been the largest professional
manufacturer for wire stranding machine and laying-up machine in
North China.
Since 2006, relying on the care and support of our customers,
Baohong Machinery has been devoted to the research and development
of wire stranding machine and laying-up machine and has made great
improvement. Now we have become the only one factory who can
develop the production of the JLK rigid stranding machine series to
be an assembly line processing in China, and we also have
independently developed the JGB Bow skip stranding lines, the CGB
Bow skip type cabling lines and the CLY High speed Cradle type
Laying-up lines.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area
of 10000 square meters, production workshop 8000 square meters. Our
company has 60 employees, including 10 R & D staffs. Annual output
value is over 10 million dollars at present,and has developed into
one of the most important Stranding Machine Manufacturer in China.
